Brochures & Data Sheets

Joining Systems (823 KB)

Data Sheet 80.100 (1.1 MB)

Printed Matter

Download Brochures

Catalogue Request

Product-Movies

TWINpoint clinching

CEC-Press for TOX Clinching

Application Examples

Airbag Housing

1/6

途径 I

途径 II

前提条件：已经有关于试验板件组合的试验报告。

1. 请您根据要连接的板件总厚度确定TOX®圆点直径，或找出符合您要求或与您的要求相近的板件组合。

2. 把表中给出的强度值与您需要的强度进行对比。

3. 根据给出的试验报告编号向TOX®公司索取包括TOX®试验连接所必需的所有数据的完整试验报告。

前提条件：根据模具列表，您的板件没有相应的试验报告，或者您需要一份关于您自己材料或板件的试验报告。对于试验，我们需要您提交一份试验委托单 (36 KB).

1. 请打印试验委托单

2. 请完整地填写试验委托单。

3. 请提供试验材料。

4. 请把试验委托单和试验材料寄给TOX PRESSOTECHNIK。您将收到一份附有显微照片的TOX®试验报告和所有冲压连接数据，如模具名称、质量控制参数“X”、抗剪强度和抗拉强度、脱模力和冲压力等等。

Tool Selection List

Selection of TOX joining point diameter and strength values

Only TOX offers the safe way for the application of the sole clinching technology with warranty. For each case of application there is provided:

1. the TOX Test Report containing all data for TOX application with warranted strength data for the TOX point;

2. the TOX Tool Passport accompanying each tool supply as information for your production and maintenance departments;
3. the TOX Data Sheet with updating system kept in our office for your TOX application, containing all information and technical modifications reported to us. A quick advising by our indoor and field service is therefore possible.

Piecepart tests and pilot series for test purposes can be made in our experimental laboratory against a participation in cost price. You are invited to visit us with your pieceparts.

For further information please call your district manager ( sales) or TOX PRESSOTECHNIK ( address).

Procedure I

Basis: Test reports of already approved material combinations.

1. Find out the TOX point diameter with the help of the actual total thickness of the metal sheets, or find a sheet metal combination corresponding or similar to yours.

2. Compare the strength data of the list with your load requirements.

3. With the help of the stated test report number you ask TOX for the complete test report containing all data regarding the required TOX joining.

Procedure II

Basis: There does not exist a test report for material like yours and you wish to get a test report using your original material or piecepart. We then need a Test Order.

1. Print the test order.

2. Complete the test order with all your data.

3. Provide the test material.

4. Send the test order and test material to TOX PRESSOTECHNIK. You will then receive a TOX Test Report with micrograph and all data relevant to your application, for example, denomination of tool, control dimension “X”, shear and tensile strengths, stripping and pressforces etc. ascertained with your materials.